Postbus 169, 3400AD
IJsselstein, Netherlands
Metrop flower fertilizer MR2
flower fertilizer npk 10-20-40Don't buy water, buy concentrated fertilizers!
The more Potash you give to a fruit or flower, the bigger the fruit of flower will be!
For the Maximum volume increase, twice the Potash than Phosphorus!!
Concentrated liquid fertilizer
In the Metrop MR2 flower fertilizer, the NPK and micro-elements balance is specially composed to produce the highest possible yield from the plant.
The raw materials of Metrop MR2 flower fertilizer is of very high purity, which makes it possible to achieve a high NPK proportion without disturbing the plant.
The quality of the raw materials ensures that it will never clog the vat or irrigation system. Once prepared with water, the EC will remain stable.
The micro elements are also added to a higher and purer degree, so that the plants have a faster and better photosynthesis, which is beneficial for the quality of the end product.
Flower Fertilizer
Metrop MR2 flower fertilizer is a high-quality plant extract containing all macro and micro nutrients required for full bud bloom in any medium.
- Visibly improves the condition of the plant’s buds;
- Assures the availability of sufficient Potash to allow the bud to reach its full size;
- Assures the availability of sufficient Phosphorus for a continued growth of the roots;
- Assures the availability of sufficient Magnesium for optimal chlorophyll and protein synthesis;
- Is adapted with the best bloom nutrients for an optimal bloom explosion;
- Does not contain any harmful colouring and is not diluted with water: it consists only of the purest raw materials.
- Therefore use with a low EC;
Use:
- From the 3rd or 4th week of the bloom, depending on the bud size, give in gradually increasing doses until the end. In the last week, rinse as needed.
- If the soil is nutrient-rich, give this mixture 1 to 3x per week.
- In case of contact with Metrop MR2 flower fertilizer in concentrated form in the eye, rinse the eyes immediately with water.
- Shake the can well.
- Keep out of reach of children.
- The Metrop MR2 flowering fertilizer is biodegradable.
Yes, you can use MR2 flower fertilizer on soil and coco substrates. There is a distinction between buffered coco substrate and sterilised coco substrate. With sterilised coco substrate, treat it as a hydroponic medium and provide the nutrient solution 6 times a day. With buffered coco, you only provide the nutrient solution when the plant needs it.
Yes, you can use MR2 flower fertilizer with hydroponic growing systems. For DWC Deep Water Culture systems, use the DWC culture schedule.
Yes, you need to adjust the pH value when growing with MR2. MR2 flower fertilizer already adjusts these values in your nutrient solution. Usually when mixing, the pH value is within the ideal range. However, tap water does not have the same pH values everywhere. We recommend a pH value between 5.4 and 6.2 for your nutrient solution. You can adjust this with pH Plus and pH Min.
That depends on how you store the MR2 flower fertilizer product. It is highly concentrated and if the water shrinks slightly due to cold, not all the dissolved elements fit into the water and are squeezed out. If the seal has been broken for a long time, water molecules will slowly evaporate and the same thing will happen. If you store the bottle at room temperature off the ground with the seal closed, the product will have a shelf life of 10 years. If the seal is broken and you want to store the product for a long time, place a piece of aluminium foil between the bottle and the cap and store the product upside down. Shake very well when using.
MR2 10-20-40+TE can last at least six months, provided the pH value remains between 5.4 and 6.2 and a circulation pump in the nutrient tank keeps the nutrient solution moving.
Yes, MR2 flower fertilizer is suitable as a foliar feed. However, there are a few different rules for foliar feeding using MR2. You can find this in the blog foliar feed.
The NPK differences in MR2 10-20-40+TE are very large, allowing a plant to absorb much more Potash to maximise plant bud growth. MR2 is also highly concentrated, so you need much less of the product. MR2 contain also essential Trace elements.
No, MR2 is a BioMineral product. Pure organic always results in a shortage of essential minerals, resulting in less growth and flowering.
Yes, MR2 can be mixed with other products. However, when a Calcium product is mixed with the MR2, the pH value of the mixing water should never exceed 6.5.
Only 2 times on the fruits and leaves. Keep a few weeks in between.